Network Camera, as small as the WAT-902 series   
     
   Network camera, supporting Full HD・PoE, as small and light as the WAT-902 series.
 Appling the 1/2.8" BSI CMOS image sensor enables high resolution and competitive high sensitivity to
 our analog cameras.
 
 
    ■Resolution Comparison  
     
  SD (WAT-250D2)   Full HD (WAT-2400S)  
           
           
   ■Sensitivity Comaprison  *Environment: Illumination approx. 0.2 lx   
     
  WAT-902H3 SUPREME   WAT-933  
 



Approx.
Fivefold
 
  Minimum Illumination:0.0005 lx    Minimum Illumination:0.0001 lx  
         
   Supporting microSD  
     
   It is able to keep recording by the stand-alone without the network connection.
 Easy to find, playback and write to PC the recorded video.
 
    ■Recommended Specification
  ・SDXC / SDHC standard
  ・MLC type
  ・Speed Class CLASS 10 or more
  ・Capacity of 128GB or less
  ■Record video 24 hours
   Setting (with the recommended 128GB microSD)
  ・1080/30p
  ・Bitrate: 10Mbit/s
  ・H.264 compressed
  *The recording time is extendable by settings.
 
     
   Video output quick start-up  
     
   Shortened 80%! Starting quickly compare with the WAT-2400.
 
 
WAT-2400S / WAT-933 WAT-2400
Approx. 6 sec.  Approx. 30 sec.
 
 
     
   Power-saving Design  
     
   Reduced 65%! A large reduction in power consumption compare with the WAT-2400.
 
 
WAT-2400S / WAT-933 WAT-2400
    PoE:1.92W/40mA
DC+12V:1.56W/130mA
     PoE:5.6W/127mA
DC+12V:5.4W/450mA
 
 
     
   Pick up sounds  
     
   The internal microphone enables not only the surveillance and monitoring but also the audio recording.
 Able to check the situation at the camera location where cannot be seen.
 The external microphone connection is available for the clearer audio recording.
 
     
   Options  
   This product exerts the optimum performance with our recommended options. 
 Please contact our distributors or dealers. Variety of options are available. >>More Options
 
     
  VARIOUS LENSES    SWI12-12-N-P5  
 

We offer lenses maximizing the
performance of the camera.

 

A power supply adaptor (DC+12V)
supporting the camera. 

 
     
  CB-06    CB-07  
 

Utilize when connecting the LINE
  output.

 
Utilize when connecting the MIC.
which is a plug-in power type.
 
     
  30CMA-R   MS50  
 

This lens mount adaptor is used to
convert a CS-mount to a C-mount.

 

With the coupler structure, the camera
can be adjusted to any desired angle.

 
         
 Back to Top
Privacy policy Terms of use  ©2015 Watec Co., Ltd.